The ITW Insulation Systems products listed below are either uniquely available in Canada or are presented with technical documentation uniquely suited to the needs of Canadian end users. You will find them listed in the ITW Metal Jacketing Library and ITW Mechanical Insulation Library along with accompanying relevant technical literature.
ITW Metal Jacketing
- ITW Canada Corrolon®
A special 3/16" circumferentially corrugated jacketing system unlike, and vastly superior to, conventional longitudinally corrugated jacketing. It is manufactured from smooth finish or stucco embossed aluminum alloy conforming to ASTM B-209. The circumferential corrugations of the product provide an additional benefit of superior weather proofing on horizontal piping when compared to standard 3/16" corrugated jacketing.
Technical Data Sheet for ITW Canada Corrolon®
- ITW Canada Galvalume®
Galvalume® roll jacketing is manufactured from low carbon cold rolled steel that has a continuous hot dipped aluminum-zinc alloy coating applied to the outer surfaces for resistance to corrosion. The special coating is composed of 55% aluminum, 1.6% silicon, and 43.4% zinc. The finished sheet has yield strength of 38,000-53,000 psi, a tensile strength of 50,000-65,000 psi, 20-36% elongation, and a hardness of 50-65 HRB.
Technical Data Sheet for ITW Canada Galvalume®
- ITW Canada Mass Loaded Vinyl
ITW's Mass Loaded Vinyl Noise Barrier is a flexible, non-reinforced mass loaded vinyl that resists the passage of sound waves and reduces the transmission of airborne noise. This mass loaded vinyl is ideal for direct application to the noise source and/or to the housing covering the noise source.
Technical Data Sheet for ITW Canada Mass Loaded Vinyl
- Thermoclad Plus® Aluminum Roll Jacketing
ITW Pabco/Childers Thermoclad Plus® Aluminum Roll Jacketing has a highly durable thermosetting polyester enamel coating on both sides PLUS a factory heat laminated 3 mil thick multi-layer Polysurlyn Moisture Barrier (PSMB) film on the interior surface.
Technical Data Sheet for Thermoclad Plus® Aluminum Roll Jacketing
- Thermoclad Plus® Deep Corrugated Sheets
ITW Thermoclad Plus® Aluminum Deep Corrugated Sheets are available in two different nominal corrugation profiles and in smooth or stucco embossed surface finishes. The corrugation profiles are engineered to provide strength and stiffness superior to that of standard Thermoclad Plus® aluminum roll jacketing.
Technical Data Sheet for Thermoclad Plus® Deep Corrugated Sheets
ITW Mechanical Insulation
- ITW Canada TRYMER® 2000 XP
TRYMER® 2000 XP insulation is polyurethane modified polyisocyanurate cellular plastic. The rigid insulation is supplied in the form of bunstock for fabrication into sheets, pipe shells, tank and vessel coverings, and other shapes for a variety of thermal insulation applications.
Technical Data Sheet for ITW Canada TRYMER® 2000 XP
If you are in need of other relevant technical information, please feel free to Contact Us for further assistance.